Select another machine from this series

PA series - welding machine with parallel guiding

Series PA series PA1

PA1

Welding range Ø

Steel > 0.25% CSteel < 0.25% C
0,5 - 5 mm
0.020 - 0.197 "
0,5 - 5 mm
0.020 - 0.197 "
CopperBrassAluminium
0,5 - 3 mm
0.020 - 0.118 "
0,6 - 4 mm
0.024 - 0.157 "
0,9 - 4 mm
0.035 - 0.157 "

Separating range steel cord outside Ø

steel rope
0,8 - 2 mm
0.031 - 0.079 "

Welding range, area

Flat steelFlat copperFlat brassFlat aluminium
0,2 - 20 mm²
24 AWG - 4 AWG
 
minimum thickness
0,2 mm
0.008 "
 
maximum width
20 mm
0.787 "
 
maximum relation thickness/width
1/100
0,2 - 7 mm²
24 AWG - 9 AWG
 
minimum thickness
0,4 mm
0.016 "
 
maximum width
20 mm
0.787 "
 
maximum relation thickness/width
1/8
0,3 - 13 mm²
22 AWG - 6 AWG
 
minimum thickness
0,3 mm
0.012 "
 
maximum width
20 mm
0.787 "
 
maximum relation thickness/width
1/30
0,6 - 13 mm²
19 AWG - 6 AWG
 
minimum thickness
1 mm
0.039 "
 
maximum width
20 mm
0.787 "
 
maximum relation thickness/width
1/10

Technical specifications

WeightNominal capacity in kVA
without annealing device36 kg
79 lbs
NV (optional)36,5 kg
79 lbs
LNV (optional)37 kg
82 lbs
at 50% duty cycle1 kVA
 
Special features
  • Resistance butt welding
  • Cutting

Accessories

schneidzange.jpgCutter
for wires up to dia. Ø 4.0 mm with max. 500 N/mm²
(punched disk with bores dias. Ø 1.4 mm - 4.5 mm, 8 bores)
hebelschere_d13.jpgLever shears D13
For steel up to Ø 12 mm for St 37, up to Ø 7 mm for hard steel and up to Ø 12 mm for non-ferrous metal
handschere_c12.jpgHand shears C12
For steel up to Ø 8 mm – 800 N/mm²
Up to Ø 5 mm over 800 N/mm²
For non-ferrous metals up to Ø 11 mm
zubehoer_lochschere_mit_schlitz_0900_0021.jpgHole-cutting shears with slot (0900-0021)For steel of Ø 5-7 mm, depending on the strength of the wire
For non-ferrous metals up to Ø 7 mm
zubehoer_lochschere_ohne_schlitz_0900_0020.jpgHole-cutting shears with slot (0900-0020)
For steel, Ø 5-8 mm, depending on wire strength
for non-ferrous metals, up to Ø 8 mm
vertikal_schleifmotor_025kw.jpgVertical grinding motor 0.25 kW
For steel Ø 0.8 – 7.0 mm
For non-ferrous metals Ø 0.8 – 6 mm
einhandschleifer.jpgSingle-handed grinder
fahrgestell_4rad_buegel.jpgRunning gear with 4 wheels
Incl. safety bow
werktisch_fahrgestell.jpgWorkbench running gear
werktisch_fahrgestell_mit_hebelschere_d13.jpgWorkbench running gear
With lever shears D13
werktisch_fahrgestell_mit_eingebauter_automatischer_nachgluehvorrichtung.jpgWorkbench running gear
With built-in automatic annealing device
werktisch_fahrgestell_mit_vertikal_schleifmotor_025kw.jpgWorkbench running gear
With vertical grinding motor 0.25 kW
werktisch_fahrgestell_mit_vertikal_schleifmotor_075kw.jpgWorkbench running gear
With vertical grinding motor 0.75 kW
maschinenleuchte.jpgMachine lamp
(Only 50Hz)
zubehoer_steuerung_v30.jpgElectronic controller V30

Write to us
We are here for you.

Being available for our customers is very important to us. If you have any questions or requests, simply use our contact form to write to us.

Strecker Team
German / French / English / Spanish / Italian
Phone: +49 6431 / 96 10 – 15
sales@strecker-limburg.de

Our Phone Service Hours:
Mon - Thu 07:30 - 16:00 CET
Fri 07:30 am - 3:00 pm

Our international representatives:
Worldwide Representatives